Few tips on how you can DIY without going to a surface pro service centre

If your own issue is, you want to learn how to fix the problems of your surface pro, and then interestingly, you are at the right place. At breakfixnow surface pro service centre, we offer tutorials on how you can DIY the problems that may arise from your surface pro. This is especially for people who do not live in Singapore. You can actually get tips on how to DIY right here on this platform. When we give out tips here, you can be rest assured that they have been tested and proven to be the best bet you can get out there. You must be aware that it can be complicated to carry out, which is why it is usually advised that you allow the experts to carry out the repairs for you. But then, we believe there are also intelligent guys out there who only need to be guided before they reproduce the solution.

A few tips on how you can repair your surface pro screen by yourself:

·         Warm up the adhesive: You do realise that adhesive is what is used to hold up the screen together, so if you want the adhesive to get off, then you must warm it up with the use of a heat gun. This way, it becomes easy to pull off.

·         Use your razor to open the screen carefully.

·         Disengage the display assembly: You do this by putting pressure when you are removing the screen. You must be careful so that you do not damage the LCD connectors.

·         After doing that, you can remove the screen from the framework.

·         After this, you would see some connectors; these connectors are what you would use to attach to the new assembly. Oh! You must have gotten a new assembly since you want to change the screen.

·         Connect to the motherboard. This is very important, otherwise, the effort you have used will be wasted and this wouldn't bode well for the new screen and the laptop as a whole.